Burnsmodelaircraft.com

The has been tested and proven over and over for years and withstands tremendous abuse. We have had head-on collisions with absolutely no damage to our or to the radio gear. Beginners have dived the

from over 75 feet up, straight into a concrete sidewalk and the only damage was a slightly crumpled nose and scuffed covering which was straightened out with a hot iron! We personally had one to land in the street at Redondo Beach here in California, on the Esplanade and a SUV drove onto the aircraft and skidded to a stop with its right front tire on the center, right where the receiver is, with no damage to the receiver or servos and the only damage was some abrasion

to the covering on the underside and the winglets had to be remounted in the field. We flew the wing within 10 minutes of the incident. We cannot promise you that you will never sustain radio damage in a crash. It is possible to crack a crystal or worse, you could damage or destroy the receiver or battery pack. No plane or radio gear is safe from possible damage, but we can tell you that the itself is nearly indestructible in normal combat flying conditions.

The was designed for combat flying and cliff soaring and the has some of the best flying characteristics combined into a single flying wing. It has an overall light flying weight and a fast semi-symmetrical airfoil with low stall speed characteristics. The result is a smooth, fast and highly maneuverable flying wing which will stay aloft even in the lightest breeze. The is designed for R/C pilots with flying skills from beginner through advanced. The will out-maneuver and destroy your opponent! (Well, anyway they will have to retrieve their shot down (knocked down) aircraft). Inverted flying with the is a breeze with its semi-symmetrical airfoil. It is manufactured from EPP (Expanded Polypropylene Foam) and the wing is joined and strengthened with a single Carbon Fiber Spar. The can be flown with an electric motor for Cliff or Inland flying. So, those of you who do not have a cliff to fly

from, you are not limited in your flying. It is great to use a High-Start system (an elastic bungee cord with 90 pound fishing line or greater, check with your hobby dealer) to fly with by taping a common drapery hook with reinforced packing tape on the bottom of the wing. We have had great fun just hand launching our at a football field just to see how many circles around the field that we can make. You can even play a modified Frisbee style golf with these It is great for two or more guys or gals to go out to a large field with trees and take turns teeing off from a spot to a predetermined location and see which of them can get closest in the shortest number of throws. Sometimes you can choose to fly to and around a tree or two to see if you can make it back and spot land your . The method of scoring is simple. The first person closest is "0", second is "1" , third is "2" and so on. You can be quite ahead of the pack and suddenly be in last place. You will be surprised how these wings can take very harsh punishment and sustain little or no damage. Usually the only damage is minor scuffing of the covering from hitting a tree. We hope you enjoy your new and wish you

The GEE BEE Z ^Ò, with a light flying weight and a fast airfoil, is a smooth, fast and highly maneuverable aircraft which can stay aloft even in the lightest breeze. On windy days at the cliffs it will perform all of the classic maneuvers. The GEE BEE Z ^Ò is made entirely from EPP (Expanded Polypropylene Foam) and Coroplast. It has a spruce spar from wingtip to wingtip and a spruce dihedral brace. We hope you enjoy your new Gee Bee Foamie and wish you many hours of great flying fun! By the way, It flew great at the cliffs at Point Fermin Park in San Pedro, California.

THE GEE BEE FOAMIE IS AVAILABLE TOTALLY SETUP AND READY TO FLY WITH A THREE CHANNEL RADIO WITH YOUR CHOICE OF ANY TWO AVAILABLE COLORS FOR ONLY $325. PLUS SHIPPING. JUST CALL US AT FOR ORDERING AND FOR DETAILS.

This is Mike Freschi, President and Founder of Redondo Beach Breezers R\C Flying Club

Mike is flying his brand new Burns Model Aircraft at Redondo Beach California, Thursday, March 20, 2008

Requires standard or smaller servos and receiver

All EPP Foam Wing with Balsa elevons

Coroplast Winglets

18 inch Carbon Fiber Spar

18 ounces with standard servos

49 inch Wingspan

12 inch Root Chord

4.5 inch Wing Tip

Wing area = 404.25 sq inches

Wing loading = 6.41 oz per sq ft

Control hardware Included

Comprehensive Instruction Manual

Requires micro or mini servos and receiver

All EPP Foam wing with Balsa elevons

Coroplast winglets

(18 inch Carbon Fiber Spar)

9-10 ounces

30 inch wingspan

9.25 inch root chord

4.5 inch wing tip

Wing area =200 sq inches

Wing loading = 6.86 oz per sq ft

Control hardware included

Comprehensive Instruction Manual

THE PRICES BELOW REFLECT CURRENT PRODUCT PRICES BY THE MANUFACTURING SUPPLIERS AND ARE SUBJECT TO CHANGE WITHOUT NOTICE ON THIS PAGE. YOU WILL BE NOTIFIED IF THE PRICE OF ANY ITEM HAS CHANGED.

THE IS AVAILABLE: IN ONE ALMOST READY TO FLY PACKAGE AND TWO READY TO FLY PACKAGES AND ONE READY TO FLY CUSTOMIZED CONFIGURATION:

(1) ALMOST READY TO FLY: WE WILL BUILD AND AND PREP THE WING WITH SERVO, BATTERY AND RECEIVER CUTOUTS WITH YOUR CHOICE OF ANY TWO AVAILABLE COLORS FOR YOUR OWN PERSONAL RADIO INSTALLATION FOR ONLY $125.⁰⁰ PLUS SHIPPING. THIS KIT INCLUDES EXTRA MATCHING COVERING TO FINISH THE AIRCRAFT AFTER THE RADIO INSTALLATION. THE PROPER LOCATION FOR THE SERVOS AND RECEIVER WILL BE OUTLINED FOR THE CUT-OUT. LOCATIONS. A MONOCOTE © IRON OR EQUIVALENT IS REQUIRED FOR FINISHING..

(2) READY TO FLY WITH YOUR OWN RADIO: WE BUILD AND PREP THE WING AND INSTALL YOUR RADIO AND YOUR CHOICE OF ANY TWO AVAILABLE COLORS FOR ONLY $135.⁰⁰ PLUS SHIPPING (MAKE ARRANGEMENTS FOR SHIPPING OR BRINGING YOUR EQUIPMENT TO US.)

(3) READY TO FLY, WITHOUT TRANSMITTER: WE SUPPLY A DUAL OR SINGLE CONVERSION AM OR FM RECEIVER WITH CRYSTAL OF YOUR CHOICE, TWO SERVOS, CUSTOM MADE TRIPLE AAA NICKEL METAL HYDRIDE (NIMH) BATTERIES WITH MICRO SWITCH HARNESS AND YOUR CHOICE OF ANY TWO AVAILABLE COLORS FOR ONLY $245.⁰⁰ PLUS SHIPPING. THIS ITEM DOES NOT INCLUDE TRANSMITTER.

(4) READY TO FLY WITH TRANSMITTER AND RECEIVER: WE SUPPLY THE RADIO TRANSMITTER OF YOUR CHOICE, RECEIVER OF YOUR CHOICE WITH CRYSTAL OF YOUR CHOICE, TWO SERVOS OF YOUR CHOICE, CUSTOM MADE TRIPLE AAA NICKEL METAL HYDRIDE (NIMH) BATTERIES WITH MICRO SWITCH HARNESS AND YOUR CHOICE OF ANY TWO AVAILABLE COLORS FOR SUPPLIERS PRICE APPROXIMATE PRICE IS: $330.⁰⁰ PLUS SHIPPING. PRIOR CALL FOR PRICING IS REQUIRED FOR THIS CUSTOMIZED VERSION. MINIMUM PRICING IS: $245.⁰⁰.

JUST CALL US AT FOR ORDERING AND ARRANGEMENTS FOR SENDING TO US OR DROPPING OFF YOUR RADIO TO FOR INSTALLATION.

THE IS AVAILABLE: IN ONE ALMOST READY TO FLY PACKAGE AND TWO READY TO FLY PACKAGES AND ONE READY TO FLY CUSTOMIZED CONFIGURATION:

(1) ALMOST READY TO FLY: WE WILL BUILD AND AND PREP THE WING WITH SERVO, BATTERY AND RECEIVER CUTOUTS WITH YOUR CHOICE OF ANY TWO AVAILABLE COLORS FOR YOUR OWN PERSONAL RADIO INSTALLATION FOR ONLY $115.⁰⁰ PLUS SHIPPING. THIS KIT INCLUDES EXTRA MATCHING COVERING TO FINISH THE AIRCRAFT AFTER THE RADIO INSTALLATION. THE PROPER LOCATION FOR THE SERVOS AND RECEIVER WILL BE OUTLINED FOR THE CUT-OUT. LOCATIONS. A MONOCOTE © IRON OR EQUIVALENT IS REQUIRED FOR FINISHING..

(2) READY TO FLY WITH YOUR OWN RADIO: WE BUILD AND PREP THE WING AND INSTALL YOUR RADIO AND YOUR CHOICE OF ANY TWO AVAILABLE COLORS FOR ONLY $125.⁰⁰ PLUS SHIPPING (MAKE ARRANGEMENTS FOR SHIPPING OR BRINGING YOUR EQUIPMENT TO US.)

(3) READY TO FLY, WITHOUT TRANSMITTER: WE SUPPLY A DUAL OR SINGLE CONVERSION AM OR FM RECEIVER WITH CRYSTAL OF YOUR CHOICE, TWO SERVOS, CUSTOM MADE TRIPLE AAA NICKEL METAL HYDRIDE (NIMH) BATTERIES WITH MICRO SWITCH HARNESS AND YOUR CHOICE OF ANY TWO AVAILABLE COLORS FOR ONLY $235.⁰⁰ PLUS SHIPPING. THIS ITEM DOES NOT INCLUDE TRANSMITTER.

(4) READY TO FLY WITH TRANSMITTER AND RECEIVER: WE SUPPLY THE RADIO TRANSMITTER OF YOUR CHOICE, RECEIVER OF YOUR CHOICE WITH CRYSTAL OF YOUR CHOICE, TWO SERVOS OF YOUR CHOICE, CUSTOM MADE TRIPLE AAA NICKEL METAL HYDRIDE (NIMH) BATTERIES WITH MICRO SWITCH HARNESS AND YOUR CHOICE OF ANY TWO AVAILABLE COLORS FOR SUPPLIERS PRICE APPROXIMATE PRICE IS: $320.⁰⁰ PLUS SHIPPING. PRIOR CALL FOR PRICING IS REQUIRED FOR THIS CUSTOMIZED VERSION. MINIMUM PRICING IS: $235.⁰⁰.